JB-King introduction:

Attention:

All JB-King we sell now,default V2.3 firmware,no need to update TB2 V2.3 firmware.

JB-King later upgrade firmware must be downloaded from JB-King official website www.jb-king.com from now on. If download unofficial upgrade firmware from other website, it will not be received normal after-sale service.

1. Booting of games designed for PS3 system firmware v3.6 and above

2. Runs your existing games and new v3.6+ games from HDD in conjunction with standard backup managers

3. Supports Fat and Slim PS3 consoles currently running any firmware up to v3.55 and any PS3 which can be downgraded successfully from v3.6+ to v3.55 (NOTE: requires other tools, JB-King cannot downgrade a console)

4. Supports all regions of consoles

5. Supports all regions of v3.6+ games

6. Rock solid crystal oscillator on board for flawless timing

7. Durable and high quality plastic case design

8. Tough and durable plastic packaging

9. Further features to be added as they are developed

10. On board 2 MBytes SPI flash

11. Does not require the power/eject trick

12. Custom v3.55 Dongle firmware behaves like OFW when JB-King is not inserted

13. Manufactured from highest grade components and Actel based

NOTICE:this item is out of stock. We advise you to choose PB2 dongle for PS3, the functions are the same.

PS3 jailbreak2 also call True Blue JB2 or PS3 True Blue USB Dongle which used for jailbreaking your V3.55 PS3 and playing V3.55 to V3.73 games which require V3.55 higher system.

Now the JB2 True Blue is in stock,and we can do same day shipping .

The PS3 jailbreak2 USB dongle allows booting of the latest the ISO's (3.6+) from special BD-R discs which can be purchased from all official resellers. The discs can be burned by any BD-R recorder and there are no special requirements on either PC or BD burner types.

Below is the detail of the PS3 jailbreak2 USB dongle:


· Can play backup games that require firmware 3.60 + (Direct boot just like the original games)

· Only burned BD Disc format with some patches will work. For now, there's no info how to make a backup iso to work with this CFW.

· Can play backup games from the HDD. PS3 games with FW 3.55 or lower (via internal or external hdd)

· Only works on the PS3 with official/custom firmware 3.55, not the downgrade PS3.

True Blue JB2 features:

* Booting of games from v3.6+ (up to v3.73) from special BD-R discs available from official resellers
* Runs games up to v3.56 from HDD in conjunction with ‘backup managers’
* Does not require the Power/Eject trick
* Custom v3.55 Dongle firmware behaves like OFW when ‘True Blue’ is not inserted
* Manufactured from highest grade components and Actel based
* Durable and high quality metal case design
* Tough and durable plastic packaging
* Further features to be added as they are developed
* On board 2 MBytes SPI flash
* Supports Fat and Slim consoles currently running any firmware up to v3.55
* And any PS3 which can be downgraded from v3.6+ to v3.55 (NOTE: Requires other tools, ‘True Blue’ currently can’t downgrade a Console)
* Supports all regions of consoles
* Supports all regions of ISO’s to be released
* Rock solid crystal oscillator on board for flawless timing
* The ‘True Blue’ dongle allows booting of the latest the ISO’s (3.6+) from special BD-R discs which can be purchased from all official resellers.
* The discs can be burned by any BD-R recorder and there are no special requirements on either PC or BD burner types.

There are 3 Element in True Blue Dongle

1. Dongle-FW (3.55)

2. USB Dongle JB2

3. Burning Game (which being Modified)

Here is list of v3.6+ games has tested and confirmed fully working and playable:

* Alice: Madness Returns
* Assassin’s Creed: Revelations
* Battlefield 3
* Bleach: Soul Resurreccion
* Bodycount
* Cabela’s Big Game Hunter 2012
* Call of Duty: Modern Warfare 3
* Call of Juarez: The Cartel
* Captain America: Super Soldier
* Catherine
* Child of Eden
* Dark Souls
* Dead Island
* Deus Ex: Human Revolution
* Dirt 3
* Dragon Ball Z: Ultimate Tenkaichi
* Dungeon Siege III
* Dynasty Warriors Gundam 3
* F.E.A.R. 3
* F1 2011
* GoldenEye 007: Reloaded
* Green Lantern: Rise of the Manhunters
* Harry Potter and the Deathly Hallows Part 2
* Just Dance 3
* Madden NFL 2012
* Metal Gear Solid HD Collection
* NBA 2K12
* Need for Speed: The Run
* No More Heroes: Heroes’ Paradise
* Portal 2
* Rage
* Ratchet & Clank: All 4 One
* Rayman Origins
* Record of Agarest War Zero
* Rune Factory: Tides of Destiny
* Saints Row: The Third Shadows of the Damned
* Silent Hill: Downpour
* Skylanders Spyro’s Adventure
* Sonic Generations
* Supremacy MMA
* Tekken Hybrid
* The Adventures of Tintin
* The Cursed Crusade
* The Elder Scrolls V: Skyrim
* The King of Fighters XIII
* The Lord of the Rings: War in the North
* The Sims 3: Pets
* Thor: God of Thunder
* Tom Clancy’s Splinter Cell Trilogy HD
* Ultimate Marvel Vs. Capcom 3
* Uncharted 3: Drake’s Deception
* Warhammer 40,000: Space Marine
* White Knight Chronicles II
* WWE ’12

G-Switch
Function feature(only support Slim console)

• prfessional module design and it is attractive and portable
  
• Use fireproofing,high pressure resistent original material and it is very safe and reliable
  
• Favarable price,easy to use,quick power on or off.
  
• Embed high quanltiy power switch,matching P3GO electronic dog to easily turn on or off and guide console
  

  

Introduction

Unlock the true potential of your PS3 with PB2 – keep your PS3 on a homebrew enabled custom firmware, while at the same time enjoying the newest and most popular PS3 games.

Features include:

* Booting of games designed for PS3 system software v3.6 and above

* Runs your existing games and new v3.6+ games from HDD in conjunction with standard backup managers

* Does not require the power/eject trick

* Custom v3.55 Dongle firmware behaves like OFW when PB2 is not inserted

* Manufactured from highest grade components and Actel based

* Durable and high quality plastic case design

* Tough and durable plastic packaging

* Further features to be added as they are developed

* On board 2 MBytes SPI flash

* Supports Fat and Slim PS3 consoles currently running any firmware up to v3.55 and any PS3 which can be downgraded successfully from v3.6+ to v3.55 (NOTE: requires other tools, PB2 cannot downgrade a console)

* Supports all regions of consoles

* Supports all regions of v3.6+ games

* Rock solid crystal oscillator on board for flawless timing

Setting up your PS3

Before you may use PB2, you must first install the 3.55‐Dongle custom firmware onto your PS3. This is similar in function to the well known kmeaw CFW; however it also includes modifications which allow PB2 to operate correctly. The 3.55‐Dongle firmware updater is distributed in a file labelled “PB2‐3.55‐CFW.zip” which can be download from download pages of our website. Proceed with the update as follows:

1. Obtain a USB storage device such as a USB HDD or USB flash memory stick

2. Create a folder on the storage device in which to save the update file. Using a PC, create a

folder named “PS3” on the storage device. Within the PS3 folder, create a folder named

"UPDATE"

3. Copy the PS3UPDAT.PUP file to the “UPDATE” folder created in step 2. Thus, you will have

this path structure on your USB storage device: \PS3\UPDATE\PS3UPDAT.PUP

4. Boot your PS3 and insert the USB storage device into the PS3

5. From the home menu, select (Settings) ‐> (System Update) ‐> (Update via Storage Media)

6. The PS3 will notify you that the “3.55‐Dongle” update was found. Select OK then follow the

onscreen instructions to complete the update

7. After the update has completed, your PS3 will restart and you now be running the 3.55‐

Dongle custom firmware. You may now enjoy the use of the PB2 dongle

(NOTE: The above procedure is only applicable to PS3’s on or below system software v3.55)

Using PB2

To use PB2, simply insert the dongle into one of the USB ports on your PS3 and power the system up. Do not remove the dongle at any point while the PS3 is running.

PB2 for the most part functions just like a regular jailbreak/CFW in that you may install and run any homebrew software and all of the standard backup managers are supported. The most notable difference is that games designed for PS3 system software v3.6 and above are also supported. However, in order to enjoy such titles, you must first obtain special “PB2 versions” which have been modified to function with PB2. Such modified versions are available for download through the “Game Patches” and are clearly labelled as being PB2 compatible. Once you have obtained PB2 modified games, simply copy them to your PS3 internal or external USB HDD as you would with any usual jailbreak game and launch in the usual manner through any one of the many available backup managers.

Updating PB2

From time to time, we will release firmware updates for PB2 which will add new features. Directions and a list of changes will be provided inside the firmware update archive file.

Produktbeschreibung

Der E3-Cardreader ist ein Micro SD Kartenleser der nächsten Generation. Installations- oder Anwendungsprobleme können endlich ausgeblendet werden, weil sie beim E3-Cardreader einfach nicht existent sind. Einen leichter zu bedienenden Entwicklerstick können wir uns kaum vorstellen. Sämtliche Aktionen werden per Drag&Drop ausgeführt, es ist keine zusätzliche Software notwendig um den 128KB Code-Bereich vom Stick zu programmieren.

Der E3-Cardreader bereichert den PC/Mac mit drei Wechsellaufwerken:

1) 4MB Flash
Das 4MB Flashlaufwerk ist perfekt zum Ablegen von kleineren kompilierten Projekten, oder Datenbanken.

2) 128KB programmierbarer Flash
Das besondere an dem programmierbaren 128KB Flashspeicher ist, dass auch dieser Speicherbereich als Wechseldatenträger angezeigt wird und ganz einfach das gewünschte Projekt im Hex Format per Drag&Drop hier rein gezogen werden kann. Der Stick stellt dieses Programm dann sofort per USB zur Verfügung.

3) Micro-SD Kartenslot (bis 32GB)
Der Micro-SD Kartenslot ermöglicht die gleichzeitige Verwendung von bis zu 32GB großen Micro-SD (SDHC) Karten.


Das schicke Appledesign vom E3-Cardreader lässt ganz richtig vermuten, dass er nicht nur Windows, sondern auch Macintosh kompatibel ist.

Mit diesem Stick sind der Fantasie von den Codemonstern so gut wie keine Grenzen gesetzt.

Die in Kürze erscheinende File-Security Applikation gibt einen ersten Eindruck über die Macht dieses kleinen Sticks. Die Applikation wird wie oben beschrieben per Drag & Drop in den 128K Bereich geschoben, nach kurzer Zeit, leuchtet die blaue LED des Sticks auf, das bedeutet, dass der Code erfolgreich umgewandelt wurde. Nun kann die Micro SD Karte formatiert und verwendet werden und man kann nur mit diesem Stick diese Micro SD Karte lesen. Sicherheit auf dem nächsten Level.

Wir sind der festen Überzeugung, dass sich jeder Hobby- oder Profiprogrammierer richtig ordentlich am E3-Cardreader austoben kann.

Features:

• Funktioniert wie ein Standard Micro SD SDHC Kartenleser (up to 32gb)
• Dreifacher Speicher: 128k, 4MB intern und bis zu 32GB extern
• Integrierter 32bit Prozessor mit 128K Flash
• 4MB programmierbares onboard FLASH ansprechbar als USB Laufwerk
  
• Plug & Play kompatibel mit allen Systemen für Win/Linux/MAC
• Kinderleichte Installation per Drag & Drop.
• 100% updatebar via PC
• keine Micro SD Karte im Lieferumfang enthalten
  
  

  E3 Card Reader - Review

shipping via Registered air mail

If you want the other shipping method (DHL/UPS/EMS): click Here!

Feature:

1. P3 HUB was initial as a normal USB hub, did not contain any unauthorized code. So it will not cause any legally issues to the seller.
2. This device support self programmable feature through USB, user can easily upgrade the system according to their need.
3. By upload the latest firmware, user do not need to unplug external USB mass storage device during restart the PS3 games console
for both slim and fat model. This will benefit user by increase the life time of the external USB mass storage device and simplify the
operation step.
4. With extra two more USB port, user can connect more USB device to the PS3 games console.

------------------------------------------------------------------------------------------------------------------

★ Break PS3 perfectly

★ No need unplug external hardisk

★ Avoid to remove the external device trouble before the user starting up the console

★ Simplify the complex steps to make the operation more humane

★ Upgradeable hardware firmware

★ PS3 Dongle and USB HUB perfect combination to support all of the external device plug and play.

★ P3 HUB multiple USB external device expansion

★ Fully compatible USB1.1 and USB 2.0 devices

★ Without driver, plug and play

★ More reliable and stable performance

★ Support common USB HUB function

F.A.Q

Features:
USB Plug and Play solution that installs in seconds without any need to open up the PS3.
Does not break your warranty seal.
Compatible with all PS3 models*, both Fat and Slim.
Supports all regions: USA, JAP, PAL and KOREA.
Fully updatable via USB on your PC using an encrypted bootloader
32KB onboard flash (most competing products only have 16KB flash)
Disables forced software updates and will never brick your console.
Supports most games and homebrew applications.
Easy-to-use software for backing up, managing, and playing games from external USB Hard Drive.
Playing games from HDD is much more enjoyable, benefiting from greatly enhanced seek and loading times.
Supports installing homebrew application on PS3 and external USB media.
Optionally PS3Key can be supplied with an "open" firmware which does not support backup loading. Users would then have to download a firmware update for PS3Key to get full functionality.
* Currently not compatible with 3.42 firmware and up

Free shipping click here

Good news!You can use PS3 break to run V3.5 games in your V3.41 system.

--------------------------------------------------------------------------------------------------------------------------------

FAQ:

Q: Is PS3break easy to install?

A: Yes, it is a groundbreaking plug & play solution. It can be fully installed in seconds, without modifying or opening your console.

Q:Does it permanently modify my console?

A:Certainly not, once the PS3break is removed, it is completely disabled.

Q:How to install the PS3break?

A:Please click here

Q:What is the warranty?

A:PS3break is sold with a 1 year warranty. All our resellers will take care of warranty issues.

Q: Why it is said an unknow USB device was found in the menu when I connect the PS3break with PS3. In addition, the dongle’s green light isn’t lighting. ?

A： Reffering to this message, it means the dongle doesn’t work normally. You need to check the following operations:

1. All external USB devices should be removed(including the USB cable to the controller) from the PS3 machine before the PS3 is started up.

2. Ensure the disc dive of the PS3 is empty

3. Ensure the PS3 system firmware is V3.41

4. On the preconditon as the above mentioned. Do as following:

(1) It’s important to make sure the power was cut off.

(2) Insert the PS3break dongle to the PS3 device.
(3) connect the power jack with PS3 device to enter its ready mode.
(4) Power on the console and press the Eject button very quick. The green light of the dongle will be flashing shortly after a sound beep from the console
(5) Once the sytem menu is appeared on the screen, the green light will switch on, which indicating the dongle works well. If not, you need to repeat this process.

Q: why the “manager.pkg ” file wasn’t appeared when I executed Install Package Files in the menu ?

A: Reffering to this problem, please sovle it as the following steps: 1. Ensure the dongle green light is switched on. If not, please refer to FAQ 1.
2. To ensure a copy of Backup Manager (manager.pkg) file in FAT32 format is copied on it. And it’s stored in the root volumn of the external USB storage. Otherwise, if it will be failure.
3. With the above 2 conditions are fulfilled, intert the external USB storage, choose “Install Package Files”, the “manager pkg” will come up，then choose and execute it.

Q：when I came back to the Games menu, to choose “Backup Manager”, the joystick of the controller refused to work, and cannot choose the files in the menu ?

A: After you choosing “Backup Manager” ，you may choose the games, delete some files or backup files,etc by using the cross-shaped control keys on the left of the joystick

Q: After I finished the backup of the file, I chose the game in “Backup Manager”menu, and execute “load”, an error message appeared, “please insert the original BD game disc”. Why ?

A: To load up the game, a leading disc is needed for loading the PS3 games by inserting any original BD game disc into the drive of the PS3

Q:When I loaded the created backup game, it was back to Games menu, the game
what I wanted hasn’t been loaded. What’s the reason ?

A: It’s normal, When you came back to Games menu, you may find the just created backup games was above the icon of “Backup Manager”. Choose and execute it.

Blog : Is the prototype PS3 break-apart controller practical?

Top 40 best PS3 games of all time – 2010

PS3 V3.55 downgrade now

Free shipping click here

Good news!You can use PS3 break to run V3.5 games in your V3.41 system.

--------------------------------------------------------------------------------------------------------------------------------

FAQ:

Q: Is PS3break easy to install?

A: Yes, it is a groundbreaking plug & play solution. It can be fully installed in seconds, without modifying or opening your console.

Q:Does it permanently modify my console?

A:Certainly not, once the PS3break is removed, it is completely disabled.

Q:How to install the PS3break?

A:Please click here

Q:What is the warranty?

A:PS3break is sold with a 1 year warranty. All our resellers will take care of warranty issues.

Q: Why it is said an unknow USB device was found in the menu when I connect the PS3break with PS3. In addition, the dongle’s green light isn’t lighting. ?

A： Reffering to this message, it means the dongle doesn’t work normally. You need to check the following operations:

1. All external USB devices should be removed(including the USB cable to the controller) from the PS3 machine before the PS3 is started up.

2. Ensure the disc dive of the PS3 is empty

3. Ensure the PS3 system firmware is V3.41

4. On the preconditon as the above mentioned. Do as following:

(1) It’s important to make sure the power was cut off.

(2) Insert the PS3break dongle to the PS3 device.
(3) connect the power jack with PS3 device to enter its ready mode.
(4) Power on the console and press the Eject button very quick. The green light of the dongle will be flashing shortly after a sound beep from the console
(5) Once the sytem menu is appeared on the screen, the green light will switch on, which indicating the dongle works well. If not, you need to repeat this process.

Q: why the “manager.pkg ” file wasn’t appeared when I executed Install Package Files in the menu ?

A: Reffering to this problem, please sovle it as the following steps: 1. Ensure the dongle green light is switched on. If not, please refer to FAQ 1.
2. To ensure a copy of Backup Manager (manager.pkg) file in FAT32 format is copied on it. And it’s stored in the root volumn of the external USB storage. Otherwise, if it will be failure.
3. With the above 2 conditions are fulfilled, intert the external USB storage, choose “Install Package Files”, the “manager pkg” will come up，then choose and execute it.

Q：when I came back to the Games menu, to choose “Backup Manager”, the joystick of the controller refused to work, and cannot choose the files in the menu ?

A: After you choosing “Backup Manager” ，you may choose the games, delete some files or backup files,etc by using the cross-shaped control keys on the left of the joystick

Q: After I finished the backup of the file, I chose the game in “Backup Manager”menu, and execute “load”, an error message appeared, “please insert the original BD game disc”. Why ?

A: To load up the game, a leading disc is needed for loading the PS3 games by inserting any original BD game disc into the drive of the PS3

Q:When I loaded the created backup game, it was back to Games menu, the game
what I wanted hasn’t been loaded. What’s the reason ?

A: It’s normal, When you came back to Games menu, you may find the just created backup games was above the icon of “Backup Manager”. Choose and execute it.

Blog : Is the prototype PS3 break-apart controller practical?

Top 40 best PS3 games of all time – 2010

PS3 V3.55 downgrade now

Good news!You can use PS3 break to run V3.5 games in your V3.41 system.

-----------------------------------------------------------------------------------------------------------------------------------

1.To avoid plugging in and out repeatly
2. Professional design, portable for convenient usage.
3. Made of fireproof, high pressure resistent material and it is very safe and reliable.
4. Reasonable price, easy to use, quickly power on or off.
5. High quality power switch, matching all jailbreak to easily turn on or off and guide console.

--------------------------------------------------------------------------------------------------------------------------------

FAQ:

Q: Is PS3break easy to install?

A: Yes, it is a groundbreaking plug & play solution. It can be fully installed in seconds, without modifying or opening your console.

Q:Does it permanently modify my console?

A:Certainly not, once the PS3break is removed, it is completely disabled.

Q:How to install the PS3break?

A:Please click here

Q:What is the warranty?

A:PS3break is sold with a 1 year warranty. All our resellers will take care of warranty issues.

Q: Why it is said an unknow USB device was found in the menu when I connect the PS3break with PS3. In addition, the dongle’s green light isn’t lighting. ?

A： Reffering to this message, it means the dongle doesn’t work normally. You need to check the following operations:

1. All external USB devices should be removed(including the USB cable to the controller) from the PS3 machine before the PS3 is started up.

2. Ensure the disc dive of the PS3 is empty

3. Ensure the PS3 system firmware is V3.41

4. On the preconditon as the above mentioned. Do as following:

(1) It’s important to make sure the power was cut off.

(2) Insert the PS3break dongle to the PS3 device.
(3) connect the power jack with PS3 device to enter its ready mode.
(4) Power on the console and press the Eject button very quick. The green light of the dongle will be flashing shortly after a sound beep from the console
(5) Once the sytem menu is appeared on the screen, the green light will switch on, which indicating the dongle works well. If not, you need to repeat this process.

Q: why the “manager.pkg ” file wasn’t appeared when I executed Install Package Files in the menu ?

A: Reffering to this problem, please sovle it as the following steps: 1. Ensure the dongle green light is switched on. If not, please refer to FAQ 1.
2. To ensure a copy of Backup Manager (manager.pkg) file in FAT32 format is copied on it. And it’s stored in the root volumn of the external USB storage. Otherwise, if it will be failure.
3. With the above 2 conditions are fulfilled, intert the external USB storage, choose “Install Package Files”, the “manager pkg” will come up，then choose and execute it.

Q：when I came back to the Games menu, to choose “Backup Manager”, the joystick of the controller refused to work, and cannot choose the files in the menu ?

A: After you choosing “Backup Manager” ，you may choose the games, delete some files or backup files,etc by using the cross-shaped control keys on the left of the joystick

Q: After I finished the backup of the file, I chose the game in “Backup Manager”menu, and execute “load”, an error message appeared, “please insert the original BD game disc”. Why ?

A: To load up the game, a leading disc is needed for loading the PS3 games by inserting any original BD game disc into the drive of the PS3

Q:When I loaded the created backup game, it was back to Games menu, the game
what I wanted hasn’t been loaded. What’s the reason ?

A: It’s normal, When you came back to Games menu, you may find the just created backup games was above the icon of “Backup Manager”. Choose and execute it.

We know, before using electronic dongle, the power must be switched off completely prior to inserting USB of PS3, then switch on to make electronic dongle work. As there is no switch on slim box, we need to plug in and out before using electronic dongle every time, which is complicated. Now the new product is available, which solves this problem. It's easy to quickly turn on or off the power after embedding electronic switch function. Any users that are interested in can give a shot.

Function features (only support Slim console):

1.To avoid plugging in and out repeatly
2. Professional design, portable for convenient usage.
3. Made of fireproof, high pressure resistent material and it is very safe and reliable.
4. Reasonable price, easy to use, quickly power on or off.
5. High quality power switch, matching all jailbreak to easily turn on or off and guide console.